If you’re having trouble with any of your Bits, here are some things you can try.
- Make sure your blue power Bit is on. You should see a red LED shining. If it’s not on, or you
- Make sure your Bits are arranged in the correct order. Remember that you always need a blue power Bit & power supply at the beginning of each circuit, and an output Bit at the end. If the last Bit in your chain is a pink input Bit, then it won’t do anything to affect your circuit.
- Check your connections. Is the control hub Bit securely snapped to the power Bit? You can also try gently wiping down the ends of the bitSnaps™ with a soft cloth (like your sleeve). Sometimes dust gets in the way of a strong connection. Try unsnapping, cleaning the bitSnaps, and snapping it all back together again.
Contact us here or give us a call at 917-464-4577 ext. 1